Skip to content
From Waste To WindFrom Waste To Wind
  • Home
  • Windturbines
    • Propel-E 50
      • Specifications
      • How to build
    • Propel-E 450
      • Specifications
      • How to build
    • Propel-E 3000
  • News
  • About us
    • Team
    • Jobs
    • Invest
  • Contact
Search this website
Menu Close
  • Home
  • Windturbines
    • Propel-E 50
      • Specifications
      • How to build
    • Propel-E 450
      • Specifications
      • How to build
    • Propel-E 3000
  • News
  • About us
    • Team
    • Jobs
    • Invest
  • Contact

Support us

  1. Home>
  2. Support us

Patreon

Support us on Patreon!

0% complete

We have been working on the prototypes for more than a year and are looking for supporters to keep the project going!


PayPal

Instagram

fromwastetowind

From Waste To Wind
Down for maintenance.. 🙂 Down for maintenance.. 🙂
How do you like our new prototype? 🥳 #renewabl How do you like our new prototype? 🥳

#renewableenergy 
#windenergy 
#climatechange 
#circulareconomy 
#recycling
Thanks to the financial support of the Climate Fun Thanks to the financial support of the Climate Fund of Stad Antwerpen we were able to bring renewable energy one step closer to the people of Antwerp! 🤗

#renewableenergy #cradletocradle #circulareconomy #climatechange #windturbine #renewableenergy
We received a lot of interesting questions in our We received a lot of interesting questions in our Masterclass. Let's hope we made the barrier for #renewableenergy a bit smaller once again!
Wees welkom! 🥳 Facebookevent: https://www.face Wees welkom! 🥳

Facebookevent: https://www.facebook.com/events/502519411804808
Bieden op het kunstwerk dat we bouwden voor @kama_ Bieden op het kunstwerk dat we bouwden voor @kama_gurka en @vandemoortele.be kan vanaf nu! De opbrengst gaat naar @plasticbank 😍

Meer op: https://www.kunstveiling.be/items/kamagurka-earth-limited-edition/449855

#recycled 
#3dprinting 
#art 
#plasticbank
👏Finishing our open-source windturbine-controll 👏Finishing our open-source windturbine-controller! Soon to be tested at Bar Paniek and installed at @lanzaroteretreats.

#open-source #windenergy #circulareconomy #3dprinting
Tower improvements! Meanwhile looking for ideas to Tower improvements!
Meanwhile looking for ideas to make towers from recup materials. Telephone poles, electricity towers,.. let us know what you think!
A lot of people ask us.. 'Can we see the 3D-printe A lot of people ask us.. 'Can we see the 3D-printer?'. So here it is! 🤩

.
Picture taken at Loods 21, Kattendijkdok-Oostkaai 21B, Antwerp
#climatechange #cradletocradle #recycling #3dprint #renewableenergy #windturbine #windenergy #vweafotowedstrijd
First flight of the new blades 3D-printed from PET First flight of the new blades 3D-printed from PET-bottles. All went well!

Location: Bar Paniek, Kattendijkdok-Oostkaai 21B, Antwerp

#renewableenergy #climatechange #windenergy #3dprinting #recycling #vweafotowedstrijd
Our first windturbineblade made from recycled plas Our first windturbineblade made from recycled plastics, dates back from 2020!

Picture taken at Loods 21 at the Kattendijkdok-Oostkaai 21B in Antwerp. Come visit us!

#3dprinting #renewables #climatechange #windenergy #vweafotowedstrijd
It's all about balance! We make sure that each sid It's all about balance! We make sure that each side has the same weight so there are no vibrations once it flies.
"Saving the planet for the young generations! Or m "Saving the planet for the young generations! Or maybe I still have 20 years to live.."
We're very happy with the overwelming interest @ma We're very happy with the overwelming interest @makerfairegent! 🔥 Are you joining us tomorrow for the last day of the Fair?
We're in the process of installing one of our wind We're in the process of installing one of our windturbines at Lanzarote, in cooperation with @lanzaroteretreats . It sure is windy here! #vweafotowedstrijd
Proud to be exhibited at Formnext as finalist in t Proud to be exhibited at Formnext as finalist in the Purmundus Challenge! Competing with big players such as BMW and Vestas in the quest for the most innovative additive product design.
How we increased the length of the bed of our Anyc How we increased the length of the bed of our Anycubic i3 Mega S to fit our innovated windturbine blades!
We retrofitted new wings on our smallest windturbi We retrofitted new wings on our smallest windturbine, the Propel-E 50! Whereas we have been prototyping alot with virgin PET-G alot in the past, we now shifted our entire workflow to recycled PET!
#preciousplasticawards2020 
@realpreciousplastic
We won the first prize in our category in the Hack We won the first prize in our category in the Hackaday Prize 2020! 10000$ coming our way means a huge impulse for the start of our company. Big thank you to Hackaday and their partners and sponsors!
We are in the process of upcycling plastic bottles We are in the process of upcycling plastic bottles to windturbineblades! Bigger models are in the making! :)
Load More... Follow on Instagram

Follow Us

  • Opens in a new tab
  • Opens in a new tab
  • Opens in a new tab

Recent Posts

  • Started printing a 1m PET-G windturbine!
  • First test run!
  • Update on 3D-printing the generator
  • Construction of worlds first 3D-printed real-size windturbine has started!

Recent Comments

  • bramp on Construction of worlds first 3D-printed real-size windturbine has started!
  • OceanWP on Started printing a 1m PET-G windturbine!
  • OceanWP on First test run!
  • OceanWP on Construction of worlds first 3D-printed real-size windturbine has started!
  • LinkedIn
  • Facebook
  • Instagram